Home Find A Hydraulic Press Request a Quote Contact Us  
   
Company Literature & Information
Hydraulic Press Technology
Hydraulic Press Features
Accu-Flex Servo Motion Press
Assembly Press
Compression Molding
News and Events
Resources
Customer Service
Benchtop Standard Presses
 
Search
 
 
 
Contact Info
  Beckwood Press Company
889 Horan Drive
Fenton, MO 63026-2405
(St. Louis)
Phone : 636.343.4100
Fax : 636.343.4424
E-Mail : info@beckwoodpress.com
   
 
 
Press Example Number
 
 
 
4-Post, SSE, 2-Post & C-Frame  
 
4-Post, SSE, 2-Post & C-Frame   |   Mold/Die Spotting Press  |   Press Brakes 
 

Complete and submit the following form for a fast response on an affordable Hydraulic Press Quotation. After submitting the form, click here if you would like to e-mail any digital drawings or photos pertaining to the quotation. Please be sure to include your company name and contact information in the e-mail.

You may also download and print an Adobe Acrobat version of the 2 Post, 4 Post & C Frame Quick Quote form by clicking here or call 800.737.0111 (636.343.4100) so that one of our experienced sales staff can guide you through the quotation process.
 
 
 
 
Or, to obtain your Free quote, please fill out the form below:
Name:* Title:
Company: Email:*
Address:* City:*
State:* Zip:*  Country:
Telephone:* Fax:
Quote Time Frame: Project Timeline:
Where did you first hear about us?* Other:
*required information
 
 
  1. Application for Press:             
  (Describe process to be performed, material thickness, area of work and end product)
 
2. Type of material/ thickness:
3. End product/ industry:
 
4. PRESS WORK: Forming Punching Others
Other (Please Specify)
   
 
5. TYPE OF PRESS: (Please check one)
2-Post Press 4-Post Press C-Frame
Straight Side Endframe (SSE) Multiple-Post  
   
  6. ACTION OF RAM:
 
Down Acting Up Acting Side Acting
Other (Please Specify)
   
  7. TONNAGE: 
  If punching / blanking, what is your punching/blanking tonnage?
   
  8. Does your application use Nitrogen cylinders in your dies for stripping?  Yes
  If so, what is the stripping force:
   
 
9. LOADING:
This press application is:
Evenly Loaded Off-Center Loaded Point loaded on center
   
 
10. SIZE OF PRESS BED & RAM: (Please note if bed and ram bolster requirements are different sizes)
Platen / bolster size: Front To Back inches millimeters
By Left to Right inches millimeters
   
 
11. PRESS AND PART FEEDING:
A. Press will feed from:
B. Parts will be fed by:
   
 
12. PLATEN / BOLSTER MACHINING OPTIONS FOR BED AND RAM:
I do not know at this time
Drilled and tapped Holes
T-bolt slots:
Other  
Size Centers inches millimeters
   
 
13. DISTANCE OF STROKE:
inches millimeters
   
 
14. SHUT HEIGHT : (Distance between platens / bolsters when ram is fully extended)
inches millimeters
   
 
15. DAYLIGHT : (Distance between platens / bolsters when ram is fully retracted)
inches millimeters
   
 
16. BED HEIGHT: (Distance from floor to top of bed platen or bolster)
inches millimeters
   
 
17. PRESS RAM SPEEDS: Please check one speed calculation method (A or B) and fill out the remaining info under the heading:
 
A. I know my inches per minute (IPM) requirement:
IPM Advance; IPM Pressing; IPM Retract;
 
B. Calculate speeds based on cycles per minute= cpm (Please complete the following cycle profile:)
Cycle Profile consists of: (What is distance of stroke used during the cycle? What is distance used under full load?)
Fast Approach; Pressing; inches millimeters
 
Note: Speed requirements are integral to the estimation process and must be given for a press quotation.
   
 
18. VOLTAGE:
  If other please specify
   
 
19. METHOD OF RAM REVERSAL:
Reverse on pressure: (Standard System)
Without dwell capability With dwell capability: What is the maximum dwell time
under pressure? seconds minutes hours
Fluctuation of holding force allowed during dwell: +/- 10% +- 5% +- 1% of total system force
Reverse on position with:
+/- .020” to .025” repeatability +/- .005” repeatability
 
*Note: For tighter tolerance, please contact a Beckwood Sales Engineer
 
Both position and pressure with above specified capabilities
   
  20. CONTROL SYSTEM: As standard, our control systems include an Allen Bradley PLC (others systems available upon request)
  Manual: PLC control system utilizing mechanical limit switches and digitally programmable pressure switch
  Programmable: (Please select one of the following:)
 
Level 1, Digital Set Point Operator Interface: Replaces mechanical limit switches and stand alone switch. Operator programs desired cycle parameters for each cycle, reduces manual set up time.
Level 2, Productivity Package: Includes touchscreen operator interface with job storage and recipe handling. All cycle parameters are programmed and saved for recall and significantly reduces operator set up time. Additional features such as alarm/ maintenance screens, diagnostics, password protection, cycle counters, and more. System is programmed for application specific requirements to suit user needs.
  Quote programmable control system as optional feature:
  Digital interface Productivity package
   
 
21. WATER ACCESSABILITY:
If a cooling system is deemed necessary, is water accessible? Yes No
   
 
22. SUPPLEMENTAL PRESS EQUIPMENT: (Please specify if equipment should either be included within the base quotation OR as option)
Bolt On Expanded Metal Guards
Please check which sides: Left Right Front Rear
 
Sliding gate on
Please check which sides: Left Right Front Rear
 
Light Curtain
Please check which sides: Left Right Front Rear
 
Fixed stops incorporated into press structure for absolute repeatable ram extension (adjustable)
 
Auto Lube system for ram slides
 
Vibration dampening leveling pads
 
Protective ram slide bellows for harsh environments or clean part requirements
 
Cooling System
Please check which type: Air/oil Water/oil Other/ I do not know at this time
 
23. Bed Cushion
24. CUSHION SIZE:
Front to Back inches millimeters
Left to Right inches millimeters
   
Cushion Tonnage
Cushion Stroke inches millimeters
 
25. Heated Platens: Please answer the following questions
A. Type:
B. Maximum temperature: °  Fahrenheit Celsius
How accurate do you need your heating tolerance +/-
C. Time to heat from ambient temperature: hours minutes
D. Is a cooling system required by Beckwood? Yes, Please Specify
   
  26. OTHER REQUIREMENTS
 
 
 
Back to the Top ^ 
Hydraulic Presses  |  Hydraulic Press Technology  |  Quick Quote  | Company Info
News  |  Events  |  Contact Us  |  Links  |  Site Map  |  Home
Copyright 2007 Beckwood Press. All Rights Reserved. Terms & Conditions