Beckwood Press Co.
889 Horan Drive
Fenton, MO 63026-2405
(St. Louis)
Phone : 636.343.4100
Fax : 636.343.4424
info@beckwoodpress.com
Press Example Search
Press Example: 274
800 Ton Capacity Example
Categories
4-Post 800 Ton Capacity Presses
Forging Presses
Off-Center Loading Presses
SSE 800 Ton Capacity Presses
- Used to cold forge parts with an integrated progressive die for a leading automotive supplier
- 3" x 44" x 58" bolsters
- 10" stroke Parker Cylinders
- Ram speeds: 222 IPM approach; 45 IPM pressing; 258 IPM return
- Remote hydraulic power system with 400 gallon oil reservoir
- 36" tall ram slide bushings, instead of Beckwood's standard oversized 18" dimension, for superior bed to ram parallelism
- 2" thick x 20" wide straight side type, end frame supports to reinforce housing posts side frames and provide additional resistance to off center loading
- Heavy duty tie rod construction
- Applied force centerline of the press can be shifted left or right via operator control
- High speed parallelism control for side to side ram correction
- Six station integrated part transfer system with sensory & part verification
- 18.8 ton capacity, 6" stroke double acting bed ejector cylinder in position #1 of the transfer system and individually controlled
- 20 ton capacity, 6" stroke double acting bed ejector cylinders in forge positions #2 through #6 of the transfer system and individually controlled
- 10 ton capacity, 1" stroke ram ejector cylinders above forge positions #3 through #6 of the transfer system and individually controlled
- Automatic ram slide lubrication system
- Four (4) Vibro Dynamic vibration dampening leveling pads
- Fixed stops included in the die
- Water cooled heat exchanger with modulating valve
- Light curtain guards front opening of the press
- Pedestal mounted controls with two hand touch buttons
- Inch, semi-auto and full-auto cycle controls
- Allen Bradley SLC 5/03 PLC control system with an Allen Bradley VersaView Interface