Beckwood Press Co.
889 Horan Drive
Fenton, MO 63026-2405
(St. Louis)
Phone : 636.343.4100
Fax : 636.343.4424
info@beckwoodpress.com
Press Example Search
Press Example: 143
- Used to punch flourescent light fixture channel punching and cutoff system
- 3" x 32" x 90" bolsters
- 2" Stroke Parker Cylinders
- Tool Set A: 60 ton punching (84 tons at 3000 PSI) 208 IPM approach, 93 IPM pressing, 168 IPM retract speeds
- Tool sets B&E: 5.1 tons punching, 550IPM approach, 550 IPM retract speeds
- Tool set C: 20 tons punching, 268 IPM approach, 318 IPM retract speeds
- Tool sets D&F: (for cutoff) 8.8 tons punching 550 IPM approach, 550 IPM retract speeds
- Hydraulic power system with 175 gallon oil reservoir
- Oversized ram guide bushings for superior ram guidance and rigidity
- Multiple ram operation
- Produces blanks in 8", 6", 4", 3" and 2" lengths; each with 2 widths
- Rigidly guided/ designed to apply force evenly over large area of tool set
- Equipped with payout reel, coil straightener, loop sensor and servo feed integration
- Programmed for 40 different jobs, each with 10 different feed lengths
- Automatic operation mode: operator enters part number and quantity to be produced and hits start button
- PLC receives inputs from pressure transducer, up stop proximity switch, and the servo feed system
- Allen Bradley SLC 5/05 PLC control system with Mitsubishi E600 Interface