|
|
|
|
| |
|
| |
Beckwood Press
Company
889 Horan Drive
Fenton, MO 63026-2405
(St. Louis)
Phone : 636.343.4100
Fax : 636.343.4424
E-Mail :
info@beckwoodpress.com |
| |
|
| |
 |
|
|
|
 |
|
|
| |
|
|
|
|
|
|
| |
|
| |
|
|
| |
770 Ton Capacity Compression Molding/Powder Compacting Example
Sub Category Name:
Powder Compacting Press Examples
Compression Molding Press Examples
770 Ton Capacity Example
Hydraulic Press Example Number: 184 |
| |
|
| |
| |
|
|
|
|
| |
| |
|
Used to powder mold for research and development in the ceramics industry to manufacture components in industries such as petrochemical, healthcare and dental
4" x 48" x 48" ram bolster
16" x 48" x 48" bed bolster with a 3" x 48" x 48" removable/ replaceable wear plate
26" stroke Parker Cylinders
Ram speeds: 58 IPM approach; 12 IPM pressing; 100 IPM return, infinitely variable
Hydraulic power system with 100 gallon oil reservoir
7" diameter x 34" oversized ram guide bushings for superior ram guidance and rigidity
25 Ton Capacity, 6" stroke , 3" x 30" R-L x 32" F-R bed ejector on centerline
Bed ejector is rigidly guided by 5.25" diameter guideposts with 11? long bushings
The pusher plate position is programmable via the PLC interface. Allows up to 4 programmed positions per job
Neoprene/ nylon "bellows" style protective boots cover the exposed ram slide areas and cylinder rods
Bolt on expanded metal guards cover back and side openings of the press
Light curtain guards front opening of the press
Water/ oil heat exchanger with a water modulating valve
PLC receives inputs from a linear transducer and pressure transducer provided on the press ram and a linear transducer for the part ejector plate
Pedestal mounted controls with two hand touch buttons
Inch and semi-auto cycle controls
Allen Bradley SLC 5/03 PLC with Mitsubilshi E600 Interface |
| |
| |
| |
|
