|
|
|
|
| |
|
| |
Beckwood Press
Company
889 Horan Drive
Fenton, MO 63026-2405
(St. Louis)
Phone : 636.343.4100
Fax : 636.343.4424
E-Mail :
info@beckwoodpress.com |
| |
|
| |
 |
|
|
|
 |
|
|
| |
|
|
|
|
|
|
| |
|
| |
|
|
| |
200 Ton Capacity Stacking Example
Sub Category Name:
200 Ton Capacity Examples
Stacking Presses
Hydraulic Press Example Number: 181 |
| |
|
| |
| |
|
|
|
|
| |
| |
|
Used as a stacking press for large stator core assemblies for the U.S. Navy by a leading manufacturer of advanced motors, generators, pumps and propulsors
4" x 42" x 42" ram bolster with 15" diameter through hole on press center
Removable 14" x 42" x 42" bed bolster shuttle with non-lube slide wear plates and a 20" diameter through hole
80" stroke Parker Cylinders, 150" daylight
Ram speeds: 245 IPM approach; 50 IPM pressing; 285 IPM return with infinite speed control in either direction
Remote power system with 100 gallon oil reservoir and noise reduction enclosure
Oversized ram guide bushings for superior ram guidance and rigidity
Press is designed to provide 0.0015" deflection per foot under uniform load of 2/3 bed surface area
149" front to rear x 62" left to right footprint; 210" tall
35,000 pound capacity bed shuttle with variable speeds in both directions
Bed shuttle powered by two 60" stroke hydraulic cylinders
Equipped with a walk - on telescoping steel tread to cover exposed pit under press bed
Automatic ram slide lubrication system Thermostatically controlled fan powered oil cooler
Neoprene/ nylon "bellows" style protective boots are provided for exposed ram slide areas
Bolt on expanded metal guards on each side opening of the press
Light curtain guards front and rear openings of the press
Press force monitored and displayed via a precision pressure transducer which feeds input data to the PLC
Selector switch for hi/low tonnage range options
Two hand palm button/ feather touch hand lever control
Allen Bradley SLC 5/03 PLC control system with Mitsubishi Operator Interface |
| |
| |
| |
|
